Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Automatic Transaxle Control System - 2.4L) >> shift cable >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2017 Hyundai Santa Fe Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Air cleaner assembly and air duct.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  2. Battery and battery tray.

    (Refer to Engine Electrical System - "BATTERY ")

  3. Remove the nut (C) from the manual control lever.
  4. Remove the shift cable (B) from the bracket (A) at transaxle side.
    Fig 1: Removing Shift Cable From Bracket
    G12051462Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the floor console assembly.

    (Refer to FLOOR CONSOLE )

  6. Disconnect the shift cable (A).
    Fig 2: Disconnecting Shift Cable
    G12051463Courtesy of HYUNDAI MOTOR AMERICA
  7. Disconnect the shift cable retainer (A) after removing the nuts.
  8. Remove the shift cable by pulling it toward the interior.
    Fig 3: Locating Shift Cable Retainer
    G12051464Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals