Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) >> DTC P0564: Cruise Control Multi-Function Input A Circuit >> Wiring Inspection >> Signal Circuit Inspection >> Check short in harness

Check short in harness

  1. IG "OFF" and disconnect Cruise switch connector and ECM connector.
  2. Measure resistance between signal and power terminals of Cruise switch harness connector.
  3. Measure resistance between signal and ground terminals of Cruise switch harness connector.

    Specification:  Infinite

  4. Is the measured resistance within specification?

    YES 

    • Go to "Check open in harness" as follows.

    NO 

scientia non olet · About Mike's Workshop Manuals