Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis (3 Of 3) >> DTC P0564: Cruise Control Multi-Function Input A Circuit >> Wiring Inspection >> Signal Circuit Inspection >> Check open in harness

Check open in harness

  1. IG "OFF" and disconnect Cruise switch connector and ECM connector.
  2. Measure resistance between signal terminal of Cruise switch harness connector and cruise signal terminal of ECM harness connector.

    Specification:  Approx. below 1Ω

  3. Is the measured resistance within specification?

    YES 

    • Go to Component Inspection procedure below.

    NO 

scientia non olet · About Mike's Workshop Manuals