Repair Procedures: Removal
- Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
- Remove the rear wheel speed sensor mounting bolt (A).
Tightening torque:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.8 lb-ft)
- Remove the rear seat back.
(Refer to REAR SEAT )
- Remove the rear wheel housing trim.
(Refer to "INTERIOR TRIM ")
- Disconnect the rear wheel speed sensor connector.
- Installation is the reverse of removal.