DTC Information: DTC Detecting Condition
DTC DETECTING CONDITIONS AND POSSIBLE CAUSES
| Item |
Detecting Condition |
Possible cause |
| DTC Strategy |
|
- Faulty HECU
|
| Enable Conditions |
- If the valve relay is switched ON and corresponding solenoid driver OFF and the voltage of solenoid < 3.5±0.5V continuously for 56ms, the failure is detected
- If the valve relay is switched ON and corresponding solenoid driver ON and the voltage of solenoid > 1.5±0.5V continuously for 56ms, the failure is detected
|
| Fail Safe |
- Inhibit the ESP/DBC control and allow the ABS/EBD control
- The ESP/DBC warning lamp is activated
|