Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System/Electronic Stability Control System Diagnosis >> DTC C1611: CAN Time-Out ECM >> DTC Inspection >> Monitor GDS Data

Monitor GDS Data

  1. Connect GDS to Data Link Connector(DLC).
  2. IG "ON".
  3. Do communication with ECM by using GDS.
  4. Is there any problem during communication?

    YES 

    • If the status is normal, check for the fuse, connectors and the power circuit to ECM. Repair as necessary and go to "Verification of Vehicle Repair " procedure.
    • If above checks has passed, go to Wiring Inspection procedure below.

    NO 

scientia non olet · About Mike's Workshop Manuals