Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2017 >> Accent Value Edition >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System/Electronic Stability Control System Diagnosis >> DTC C1201: Wheel Speed Sensor Front-LH Range/Performance/Intermittent >> DTC Inspection >> GDS Data Analysis

GDS Data Analysis

  1. IG "ON".
  2. Connect GDS to Data Link Connector(DLC).
  3. Start and drive vehicle in gear and maintain vehicle speed at or above 40km/h. (24mph)
  4. Monitor the "WHEEL SPEED SENSOR" parameter on the "Current Data  " menu of the GDS.

    Specification:  Compare with other parameters related to wheel speed sensor

    If it is the same as other parameters, it is in normal condition

  5. Is parameter displayed within specifications?

    YES 

    • Fault is intermittent caused by poor connection in wheel speed sensor harness and/or HECU's connector or was repaired and HECU memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "Verification of Vehicle Repair " procedure.

    NO 

    • Go to next step.
scientia non olet · About Mike's Workshop Manuals