Repair Procedures: Installation

NOTE: Before installing, check that the Shift Lever in the "N" position.

Install the Shift Lever Assembly (A).
Tightening Torque:

9.8 ~ 13.7 N.m (1.0 ~ 1.4 kgf.m, 7.2 ~ 10.1 lb-ft)

Fig 1: Installing Shift Lever Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Install the Shift Cable (A).
NOTE: Insert the Shift Cable after checking the direction of Projection (B) to prevent wrong assembly.

Fig 2: Installing Shift Cable
Courtesy of HYUNDAI MOTOR AMERICA
Connect the Main Connector (A).

Fig 3: Connecting Main Connector
Courtesy of HYUNDAI MOTOR AMERICA
Install the Floor Console Assembly.
(Refer to: Body - "FLOOR CONSOLE ").
Install the Shift Lever Knob Assembly.
1. Install the Knob Assembly (A) and then fix the Pin (B).
  
  Fig 4: Installing Knob Assembly And Pin
  Courtesy of HYUNDAI MOTOR AMERICA
2. Install the Cover (A).
  
  Fig 5: Installing Cover
  Courtesy of HYUNDAI MOTOR AMERICA
CAUTION: Check that operating surely at each range of the Inhibitor Switch corresponding to each position of the Shift Lever.