Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Ignition System - 1.6L T-GDI) >> Spark Plug >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the Ignition Coil.

    (Refer to: Ignition System - "IGNITION COIL ").

  2. Using a Spark Plug Wrench, remove the Spark Plug (A).
    NOTE:
    • Be careful that no contaminates enter into Spark Plug holes.
    Fig 1: Locating Spark Plug
    G10604374Courtesy of HYUNDAI MOTOR AMERICA