Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Tucson Limited, FWD >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Dual Clutch Transmission Control System - 1.6L >> Input Shaft Speed Sensor 1 >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Remove the air cleaner assembly and air duct.

    (Proceed to Engine Mechanical System - "AIR CLEANER 1.6L ")

  2. Remove the TCM.

    (Proceed to Dual Clutch Transmission Control System - "TCM ")

  3. Remove the battery and tray.

    (Proceed to Engine Electrical System - "BATTERY ")

  4. Remove the clutch actuator.

    (Proceed to Dual Clutch Transmission Control System - "CLUTCH ACTUATOR ")

  5. Disconnect the input shaft speed sensor (A).
    Fig 1: Disconnecting Input Shaft Speed Sensor
    G11675921Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the input shaft speed sensor after removing the bolt (A-2ea).
Fig 2: Removing Input Shaft Speed Sensor
G11675922Courtesy of HYUNDAI MOTOR AMERICA
Fig 3: Removing Bolt (A-2ea)
G11675923Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals