Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Automatic Transaxle Control System (HEV)) >> Shift Lever >> Repair Procedures >> Removal >> Shift Lever Assembly Replacement

Shift Lever Assembly Replacement

WARNING: This page is about a different car, the 2015 Hyundai Sonata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the center console assembly.

    (Refer to "CONSOLE ".)

  2. Disconnect sports mode connector (A).
    Fig 1: Identifying Sports Mode Connector
    G10588876Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the shift cable (B).
    Fig 2: Identifying Shift Cable
    G10588877Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the shift lever assembly (B) by removing the bolts (A-4 ea).

    Tightening torque:  9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

    Fig 3: Identifying Shift Lever Assembly & Bolts
    G10588878Courtesy of HYUNDAI MOTOR AMERICA
  5. Installation is the reverse of removal.
    NOTE: Make sure vehicle does not roll before setting room side shift lever and T/M side manual control lever to "N" position.
scientia non olet · About Mike's Workshop Manuals