Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Sonata Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Cluster Module Diagnosis) >> DTC B1000-51: EOL Not Programmed >> General Information >> DTC Detecting Condition

General Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • Check CAN communication status
  1. Check option information and performance of cluster
  2. Perform cluster coding procedure
  3. Check EPB, ESC, MDPS, ABS, AIRBAG
  4. Check Cluster
Enable Conditions
  • Failed coding or not performed coding procedure for cluster
Threshold Value
  • Not performed cluster coding
  • Failed Initial coding performance
Diagnostic Time
  • Virgin State or EOL programming error detected
DTC Erasing Time
  • performed correct coding procedure or erased DTC after solved problem
scientia non olet · About Mike's Workshop Manuals