Monitor Scantool Data

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.

Check DTC
1. Check DTC with GDS.
2. Check DTC related CAN communication is set on SMK unit and every modules.
3. If there is DTC related Module Check the DTC according to troubleshooting guide.
4. Resolve and erase the DTC with GDS.
5. Is the DTC erased?
  YES
  - Check poor connection between harness connector and SMK unit or ECM:
    Thoroughly check the looseness, poor connection, bent, corrosion, contamination, deformation or damage of connector. Resolve or replace as necessary and then; Proceed to: "VERIFICATION OF VEHICLE REPAIR " procedure.
  NO
  - Continue to next procedure.