Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Santa Fe Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System >> Blind Spot Detection Unit >> Repair procedures >> Installation

Repair procedures: Installation

  1. Install the BSD units to the rear panel.
  2. Install the rear bumper.
  3. Connect the negative (-) battery terminal.
    NOTE: Take care not to confuse left side (master) and right side (slave) unit when installing.
    BSD units connector connect to the wiring connector.
    Item Left (Master) Right (slave)
    Shape
    G10577284
    G10577285
    Remarks Check the bracket
scientia non olet · About Mike's Workshop Manuals