Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Genesis Coupe 3.8, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Body Control Module Diagnosis) >> DTC B162A-00: Wiper Motor Module LIN Fault >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2016 Hyundai Genesis and 2015 Hyundai Genesis. However, it is still accessible from the selected car via links, so may be relevant.
Item Conditions for setting DTC Possible Cause
DTC Strategy
  • Check LIN Communication
  1. "WMM" LIN line open/poor connection
  2. "WMM" LIN line short to battery
  3. "WMM" LIN line short to ground
  4. LIN communication line protocol error from electrical noise
Enable Conditions
  • IG Key "ON"
Threshold Value
  • WMM's LIN data is not received
Diagnostic Time
  • Immediately
DTC Erasing
  • Erased DTC after solved problem
scientia non olet · About Mike's Workshop Manuals