Component Inspection

■ Check Main relay 

1. Substitute with a known - good METAL CORE BLOCK (PCB #1) and check for proper operation.
2. Is the signal normal?

   YES 

   • Replace METAL CORE BLOCK (PCB #1) and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

   NO 

   • Many malfunctions in the electrical system are caused by poor harness(es) and terminals. Faults can also be caused by interference from other electrical systems, and mechanical or chemical damage. So, check poor connections and the related circuit between ECM and component thoroughly. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.