Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Genesis 3.8, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Smart Cruise Control System - 5.0L) >> Smart Cruise Control Switch >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the air-bag module from the steering wheel.

    (Refer to "DRIVER AIRBAG (DAB) MODULE AND CLOCK SPRING ")

  3. Remove the cover (A) after loosening the screw.
    Fig 1: Steering Cover
    G10465143Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the cruise control switch connector.
  5. Remove the cruise control switch mounting screws (A).
    Fig 2: Cruise Control Switch Mounting Screws
    G10465144Courtesy of HYUNDAI MOTOR AMERICA
  6. Remove the cruise control switch (A).
    Fig 3: Cruise Control Switch
    G10465145Courtesy of HYUNDAI MOTOR AMERICA
    Fig 4: Cruise Control Switch Components
    G10465146Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals