Current data Analysis
- IG key "ON".
- Perform "Current Data" procedure in the "Vehicle S/W Management" with GDS.
- Recline the seat all the way to the front and rear by operating "Driver reclining switch".
- Monitor "Reclining motor" and "Limit switch" related parameters in the "Current Data"
.
■ Reference data
Seat position Current Data Forward Max. Recline Forward Limit Switch OFF Recline Backward Limit Switch ON Recline Forward Motor Output ON Recline Backward Motor Output OFF Recline Position 864 edge Backward Max. Recline Forward Limit Switch ON Recline Backward Limit Switch OFF Recline Forward Motor Output OFF Recline Backward Motor Output ON Recline Position 0 edge CAUTION: This current data is nothing but an example at certain condition. Thus, the real current data could be different form this example. - Is the displayed current data normal?
YES
- Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
- Repair as necessary, go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Check the seat movement restrain by obstacles.
- Check open/poor connection in the reclining motor circuit.
- Check short to ground in the reclining motor circuit.
- Go to "WIRING INSPECTION " procedure.