Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System - 2.0L) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF.
  2. Remove the ECTS (Refer to: "Removal ").
  3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4.
  4. Check that the resistance is within the specification.

    Specification  : Refer to: "Specification ".

scientia non olet · About Mike's Workshop Manuals