Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Brake System) >> Front Disc Brake >> Repair Procedures >> Inspection >> Front Brake Pad Check

Front Brake Pad Check

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the pad wear. Measure the pad thickness and replace it, if it is less than the specified value.

    Pad Thickness 

    Standard value: 11 mm (0.43 in)

    Service limit: 2.0 mm (0.0787 in)

  2. Check that grease is applied, to sliding contact points and the pad and backing metal for damage.
    Fig 1: Checking Front Brake Pad Thickness
    G10750675Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals