Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Heater System) >> Temperature Control Actuator >> Repair Procedures >> Replacement >> [Passengers Temperature Control Actuator]

[Passengers Temperature Control Actuator]

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the heater & blower assembly.

    (Refer to: Heater - "HEATER UNIT ").

  3. Separate the blower unit from the heater unit after loosening the screws.
    Fig 1: Loosening Blower Unit Screws
    G10751932Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the connector (A) and then remove the temperature control actuator (B) after loosening the mounting screws.
    Fig 2: Connector And Temperature Control Actuator Mounting Screws
    G10751933Courtesy of HYUNDAI MOTOR AMERICA
  5. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals