Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Elantra Value Edition >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Troubleshooting >> ABS Does Not Operate >> Inspection Procedures >> Check The Ground Circuit

Check The Ground Circuit

  1. Disconnect the connector from the ABS control module.
  2. Check for continuity between terminals 13, 38 of the ABS control module harness side connector and ground point.
  3. Is there continuity?

    YES 

    • Check the wheel speed sensor circuit.

    NO 

    • Repair an open in the wire and ground point.
    Fig 1: Checking Continuity Between ABS Control Module Harness Side Connector Terminals And Ground Point
    G10534067Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals