Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Elantra SE, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Manual Transaxle System) >> Back-Up Lamp Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2016 Hyundai Elantra GT and 2015 Hyundai Elantra GT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the back up lamp switch connector (A).
    Fig 1: Disconnecting Back Up Lamp Switch Connector
    G10750095Courtesy of HYUNDAI MOTOR AMERICA
  2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity.
    Fig 2: Checking Continuity Between Backup Lamp Switch Terminals 1 And 2
    G10750096Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals