Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Elantra Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (Engine Control System - 2.0L) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Identifying Engine Coolant Temperature Sensor Connector
    G10749864Courtesy of HYUNDAI MOTOR AMERICA
  3. Supplement the Engine coolant (Refer to: "ENGINE COOLING SYSTEM - 2.0L ").
scientia non olet · About Mike's Workshop Manuals