Repair Procedures: Removal: Notes
Pressure Side Impact Sensor
CAUTION:
- Removal of the airbag must be performed according to the precautions/procedures described previously.
- Before disconnecting the side impact sensor connector(s), disconnect the side airbag connector(s).
- DO NOT turn the ignition switch ON and DO NOT connect the battery cable while replacing the side impact sensor.
- Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
- Remove the front door trim.
(Refer to: Body - "FRONT DOOR TRIM ").
- Disconnect the pressure side impact sensor connector (A).
- Loosen the pressure side impact sensor mounting screws (B) and then remove the pressure side impact sensor.