Repair Procedures: Removal
CAUTION:
- Removal of the airbag must be performed according to the Precautions/Procedures described previously.
- Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
- DO NOT turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
- Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
- Left side - Remove the head lamp assembly.
(Refer to: Body electrical - "HEAD LAMPS ").
Right side - Remove the washer reservoir.
(Refer to: Body electrical - "FRONT WASHER MOTOR ").
- Disconnect the front impact sensor connector (A).
- Remove the front impact sensor after loosening the mounting nut (B).