Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Cluster Module Diagnosis) >> DTC B1602: CAN Error >> Verification of Repair >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different car, the 2016 Hyundai Elantra and 2015 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect GDS and select "Diagnostic Trouble Codes (DTC)"  mode.
  2. Erase the DTC's and Operate the vehicle within DTC Enable conditions in General information.
  3. Is any DTC present again?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System performing to specification at this time.
scientia non olet · About Mike's Workshop Manuals