Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Elantra GT Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Automatic Transaxle Control System - A6GF1) >> Transaxle Oil Temperature Sensor >> Repair procedures >> Inspection

Repair procedures: Inspection

WARNING: This page is about a different car, the 2016 Hyundai Elantra and 2015 Hyundai Elantra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect the solenoid valve connector.
  3. Measure resistance between sensor signal terminal and sensor ground terminal.
  4. Check that the resistance is within the specification.
scientia non olet · About Mike's Workshop Manuals