Passenger Temperature Control Actuator

Disconnect the negative (-) battery terminal.
Remove the side cover (A).

Fig 1: Side Cover
Courtesy of HYUNDAI MOTOR AMERICA
Remove the right extension cover (A).

Fig 2: Right Extension Cover
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the damper (A) from the glove box (C) and then remove the glove box lift (B).

Fig 3: Damper, Glove Box And Glove Box Lift
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the pin (A), then remove the glove box (B).

Fig 4: Removing Glove Box Pin
Courtesy of HYUNDAI MOTOR AMERICA
Remove the crashpad lower cover (A) and then disconnect the connector (B).

Fig 5: Crashpad Lower Cover And Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the glove box housing (A).

Fig 6: Glove Box Housing
Courtesy of HYUNDAI MOTOR AMERICA
Remove the shower duct (A).

Fig 7: Shower Duct
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the temperature control actuator connector (A).

Fig 8: Temperature Control Actuator Connector
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the mounting screw and then remove the temperature control actuator (B).
Installation is the reverse order of removal.