Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2016 >> Azera Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Windshield Wiper System & Washer System >> Front Washer Motor >> Repair Procedures >> Inspection >> Washer Fluid Level Sensor Switch

Washer Fluid Level Sensor Switch

  1. Disconnect the negative (-) battery terminal.
  2. Drain the washer fluid less than 650 cc.
  3. Check for continuity between the No. 1 and No. 2 terminal in each float position.

    There should be continuity when the float is down.

    There should be no continuity when the float is up.

  4. If the continuity is not as specified, replace the washer fluid level switch.
Fig 1: Washer Fluid Level Sensor Switch
G10369114Courtesy of HYUNDAI MOTOR AMERICA
Fig 2: Washer Fluid Level Sensor Switch Continuity Reference Chart
G10369115Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals