Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2015 >> Veloster Turbo, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System - 1.6L GDI) >> Engine Coolant Temperature Sensor (ECTS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the Ignition Switch OFF and disconnect the Battery Negative (-) Cable.
  2. Disconnect the Engine Coolant Temperature Sensor Connector (A).
    Fig 1: Engine Coolant Temperature Sensor Connector
    G10607924Courtesy of HYUNDAI MOTOR AMERICA
  3. Supplement the Engine Coolant (Refer to: "Cooling System" in EM procedure).
scientia non olet · About Mike's Workshop Manuals