Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE:

If the oil seal on the transaxle case side is damaged and fluid is leaking, replace the oil seal with a new unit. When installing the new oil seal, use the specialized tool (oil Seal Installer, 09453-2F300).

Fig 1: Installing Oil Seal Using Oil Seal Installer
Courtesy of HYUNDAI MOTOR AMERICA

Install in the reverse order of removal.
Adding Manual Transaxle Fluid after Installing the Manual Transaxle.
(Refer to: Manual Transaxle System - "MANUAL TRANSAXLE FLUID ").
Perform Bleeding Air Procedure in the Concentric Slave Cylinder after pouring the Brake Fluid.
(Refer to: Concentric Slave Cylinder Assembly - "Adjustment").