Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2015 >> Veloster Base, Automatic DCT Trans >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Dual Clutch Transmission Control System - 1.6L GDI >> Shift Lever >> Repair Procedures >> Adjustment >> Adjusting the Control Cable

Adjusting the Control Cable

  1. Place the Shift Lever in the interior and the Transmission Manual Control Lever to the 'N' position.
  2. Connect the Shift Lever (A) in the interior with the Control Cable (B).
    Fig 1: Connecting Shift Lever
    G10608158Courtesy of HYUNDAI MOTOR AMERICA
  3. Lightly push the Shift Cable towards 'F' to tighten the Cable.
  4. Tighten the Nut (A) to the Specified Torque.

    Tightening Torque: 

    9.8 ~ 14.7 N.m (1.0 ~ 1.5 kgf.m, 7.2 ~ 10.8 lb-ft)

    Fig 2: Pushing Shift Cable
    G10608159Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals