Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2015 >> Santa Fe GLS, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control (ESC) System >> Front Wheel Speed Sensor >> Repair procedures >> Removal

Repair procedures: Removal

  1. Remove the front wheel and tire.

    Tightening torque: 

    88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

  2. Remove the front wheel speed sensor mounting bolt (A).

    Tightening torque: 

    6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)

    Fig 1: Front Wheel Sensor Mounting Bolt
    G10575918Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the front wheel guard.
  4. Remove the front wheel speed sensor cable mounting bolt (A).
    Fig 2: Front Wheel Speed Sensor Cable Mounting Bolt
    G10575919Courtesy of HYUNDAI MOTOR AMERICA
  5. Disconnect the front wheel speed sensor connector (B) and then remove the front wheel speed sensor.
    Fig 3: Front Wheel Speed Sensor Connector
    G10575920Courtesy of HYUNDAI MOTOR AMERICA
  6. Installation is the reverse of removal.
scientia non olet · About Mike's Workshop Manuals