System Inspection

Was the PCM/ECM just replaced or reflashed?
YES
- Using a GDS, perform "VIN WRITING " procedure. Refer to the latest Reference manual for GDS and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Using a GDS, read VIN information.
  If there is no proper VIN information, perform "VIN WRITING " procedure.
  
  If VIN information exists, substitute with a known-good PCM/ECM and check for proper operation. If the problem is corrected, replace PCM/ECM.
  
  And go to "VERIFICATION OF VEHICLE REPAIR " procedure.