| DTC Strategy |
|
- Open circuit in brake switch line
- Faulty brake light switch
- Faulty input stage in HECU
|
| Monitoring Period |
- Continuous (only normal voltage)
|
| Enable Conditions |
- In case of over 20 kph (12.4 mph) speed and under 7 bar of Pressure sensor input, monitoring a fault if Brake light signal keeps 'ON' for 120 seconds.
- Monitoring a fault if Brake light signal keeps 'OFF' for 1 second in case of over 15 bar of Pressure sensor input.
|
| Fail Safe |
- Inhibit the ESP (ESC) control and allow the ABS/EBD control
- The ESP (ESC) warning lamp is activated
|