Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2015 >> Accent GLS, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System/Electronic Stability Control System Diagnosis >> DTC C1260: Steering Angle Sensor Circuit-Signal >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

Item Detecting Condition Possible cause
DTC Strategy
  • Signal Monitoring
  1. External noise
  2. Faulty steering wheel sensor
Enable Conditions
  • The STN is low more than ±}20 degrees for 70msec.
  • When the steering wheel is turned more than 370±}5 degrees, if center is not detected, ECU detects the failure
  • When the steering wheel angle is higher than 700 degrees ECU detects the failure
  • During straight driving, if the steering wheel angle is larger than 55±}5 degree ECU detects the failure
  • When the curve is detected after driving straight, if there is no variation of the steering wheel angle for 3sec, ECU detect the failure
  • While the vehicle drive 60±}5 degree ↔ -60±}5 degree, if STN is not detected low, ECU detect the failure
  • While steering angle sensor wheel through center, if steering angle sensor is against specification three times, ECU detect the failure
Fail Safe
  • Inhibit the ESP/DBC control and allow the ABS/EBD control
  • The ESP/DBC warning lamp is activated
scientia non olet · About Mike's Workshop Manuals