Monitor Scantool Data

WARNING: This page is about a different car, the 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.

Check DTC
1. Check DTC with scantool.
2. Check DTC related CAN communication is set on SMK unit and every modules.
3. If there is DTC related Module Check the DTC according to troubleshooting guide.
4. Repair and erase the DTC with Scantool.
5. Is the DTC erased?
  YES
  - Check poor connection between harness connector and SMK Unit or EMS ECU:
    Thoroughly check the looseness, poor connection, bent, corrosion, contamination, deformation or damage of connector. "Repair or replace as necessary Repair" procedure.
  NO
  - Go to next procedure.