Description and Operation: Operation

WARNING: This page is about a different car, the 2013 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.

OPERATING MOD DESCRIPTION

OFF mod	Entry - LF command Air pressure sample: 60 sec Temperature sample: 60 sec Exit - LF command or pressure change of > 19 psi
Stationary mod	Entry - From OFF mod or when no motion detected Air pressure sample: 60 sec Temperature sample: 60 sec Motion sample: 15 sec Exit - When detected motion by sensor & verified
AL (Auto learning) mod	Entry - Motion detected Air pressure sample: 10.8 sec Temperature sample: 10.8 sec Motion sample: 10.8 sec Exit - Transmission of 16 blocks
Roll mod	Entry - AL mod expires Air pressure sample: 15 sec Temperature sample: 15 sec Motion sample: 60 sec Exit - no further motion detected
Service mod	Entry - Speed below detection level Air pressure sample: 15 sec Temperature sample: 15 sec Motion sample: 15 sec Exit - Further motion detected
RF test mod	Entry - LF command Air pressure sample: 15 sec Temperature sample: 15 sec Motion sample: 15 sec Exit - Following 8 hrs duration
Alter mod	Entry - Detection of pressure change Air pressure sample: 2 sec Temperature sample: 2 sec Exit - Following 2 pressure sample or pressure