Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Control System - Non-Turbo) >> Fuel Tank Pressure Sensor (FTPS) >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different car, the 2013 Hyundai Veloster and 2012 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the rear seat (Refer to "Seat ").
  3. Remove the fuel pump service cover (A).
    Fig 1: Identifying Fuel Pump Service Cover
    G08807063Courtesy of HYUNDAI MOTOR AMERICA
  4. Disconnect the fuel tank pressure sensor connector.
  5. Remove the fuel tank pressure sensor (A) after releasing the hooks vertically.
    Fig 2: Identifying Fuel Tank Pressure Sensor
    G08807064Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals