Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Control System - Non-Turbo) >> Fuel Pressure Regulator Valve >> Repair procedures >> Inspection

Repair procedures: Inspection

WARNING: This page is about a different car, the 2013 Hyundai Veloster and 2012 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the fuel pressure regulator valve connector.
  3. Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  Refer to "Specifications "

scientia non olet · About Mike's Workshop Manuals