Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Veloster Base, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Engine Control System - Non-Turbo) >> Engine Coolant Temperature Sensor (ECTS) >> Repair procedures >> Removal

Repair procedures: Removal

WARNING: This page is about a different car, the 2013 Hyundai Veloster and 2012 Hyundai Veloster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the engine coolant temperature sensor connector (A).
    Fig 1: Identifying Engine Coolant Temperature Sensor Connector
    G08807023Courtesy of HYUNDAI MOTOR AMERICA
  3. Supplement the engine coolant (Refer to "Cooling System ").
scientia non olet · About Mike's Workshop Manuals