Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Sonata Hybrid Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (HEV) >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> [Bank 1 / Intake]

[Bank 1 / Intake]

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (A).
  3. Remove the installation bolt (B), and then remove the sensor.
    Fig 1: Identifying Camshaft Position Sensor (CMPS) Connector With Installation Bolt (Bank 1/ Intake)
    G07744130Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About Mike's Workshop Manuals