Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Santa Fe Sport 2.0T, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> CVVT Oil Control Valve (OCV) >> Repair procedures >> Removal >> Bank 1/Exhaust

Bank 1/Exhaust

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the CVVT oil control valve connector(A).
  3. Remove the installation bolt (B), and then remove the valve from the engine.
    Fig 1: Identifying CVVT Oil Control Valve Connector And Installation Bolt
    G09365062Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals