Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Santa Fe Sport 2.0T, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Purge Control Solenoid Valve (PCSV) >> Repair procedures >> Removal

Repair procedures: Removal

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the purge control solenoid valve connector(A).
  3. Disconnect the vapor hoses (B) from the purge control solenoid valve.
    Fig 1: Identifying Purge Control Solenoid Valve Connector And Vapor Hoses
    G09365056Courtesy of HYUNDAI MOTOR AMERICA
  4. Remove the valve from the bracket in the direction of the arrow.
    Fig 2: Removing Valve From Bracket
    G09365057Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals