Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Genesis 5.0 R-Spec >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transaxle Control System - 3.8L) >> Transaxle Oil Temperature Sensor >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Turn ignition switch OFF.
  2. Disconnect the E Module connector.
  3. Measure resistance between sensor signal terminal and sensor ground terminal.
  4. Check that the resistance is within the specification.
scientia non olet · About Mike's Workshop Manuals