Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Genesis 5.0 R-Spec >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transaxle Control System - 3.8L) >> Inhibitor Switch >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Installation is the reverse of removal.
    NOTE: Assemble the control lever (G) after seating hole (H) aligning.
    Fig 1: Identifying Control Lever And Setting Hole
    G08834385Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals