Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Equus Ultimate >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Blind Spot Detection System >> Blind Spot Detection Unit >> Repair Procedures >> Removal >> Blind Spot Detection (BSD) Unit

Blind Spot Detection (BSD) Unit

  1. Disconnect the negative (-) battery.
    CAUTION: Be careful when removing the blind spot detection unit. The bracket may break off from the bumper.
  2. Remove the rear bumper.

    (Refer to "REAR BUMPER COVER ")

  3. Remove the blind spot detection unit (A) after loosening the mounting nuts.
    Fig 1: Identifying Blind Spot Detection Unit
    G09791569Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals