Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Elantra Limited >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transaxle System) >> Manual Transaxle System >> Back-up Lamp Switch >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the back up lamp switch connector (A).
    2. Fig 1: Back Up Lamp Switch Connector (A)
    G00558258Courtesy of HYUNDAI MOTOR AMERICA
  2. Check the continuity between no. 1 and 2 terminals of backup lamp switch. When the shift lever is in reverse, there should be continuity
    3. Fig 2: Identifying Terminals 1 & 2 Of Back Up Lamp Switch
    G00558259Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals