Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Hyundai >> 2014 >> Azera Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module Diagnosis >> DTC B1698-00: CAN timeout between IPM and SWRC >> General Information >> DTC Detecting Condition

General Information: DTC Detecting Condition

Item Detecting Condition Possible Cause
DTC Strategy
  • CAN Comm. Check (IPM ↔ SWRC)
  1. IG ON
    1. No receiving CAN Data owing to BUS OFF (Check CAN BUS ERROR DTC is being)
    2. IPM CAN High/Low Lines open together
    3. Check SWRC (Including the related fuses)
    4. SWRC CAN High/Low Lines open
Enable Conditions
  • IPM power on
Threshold Value
  • No message from SWRC to IPM for 10 sec.
Diagnostic Time
  • 10 sec.
DTC Erasing Time
  • DTC is erased immediately after receiving data from SWRC
scientia non olet · About Mike's Workshop Manuals